More Aggregate Processing Solutions

More quality Aggregate Processing Solutions: Dureform Channel Bar Liners, Spray Bar Deflectors, Skirt Boards, and two- and four-hole Impact Pads, Wear Sheets.

Channel Bar Liners

Looking to improve the life of your screen media? AES now offers 4′ channel bar liners in DUREFORM polyurethane for your screening applications. Ask for part number UCBL38.

Dureform Channel Bar Liner

4′ Channel Bar Liners in polyurethane for screening applications (AES pn: UCBL38)

 

Spray Bar Deflectors

Spray bar deflectors are also available in two sizes. These are durable and economical water spray solutions for tough applications. Available sizes are for 1½″ and 2″ pipes. USD15B & USD20B are the respective part numbers.

Spray Bar Deflector

Dureform Spray Bar Deflector. Durable and economical water spray solutions for tough applications. Available sizes 1½″ and 2″ (USD15B & USD20B).

Skirt Board

When economical black rubber skirt board just won’t do the job, consider upgrading to DUREFORM polyurethane skirt board. Used in applications where performance is key, this unique, low friction skirt board will solve some tough wear challenges.  Available in 60A, dark blue, with single bevel edge. Available in 25′ rolls ½″ thick with four width options 4″, 6″, 8″ and 10″; and ⅜″ thick with two width options 4″ and 6″;   50′ rolls ½″ thick in two width options 6″ and 8″.  All of these eight listed sizes are in stock!  Call for a quotation.

For high speed applications, ask about our 70-73A formula.  This is a more rigid, less flexible skirting.  However, it is ideal for high speed belts in which degradation from excessive heat is a factor.  Available in ½″ thick x 4″, 6″ and 8″ widths, and 25′ roll lengths.  This product is yellow in color with straight edges (no bevel).

Skirt Board

Dureform low-friction polyurethane skirt boards are now available in eight sizes (38″x 4″ or 6″ x 25′; ½″ x 4″, 6″, 8″, or 10″ x 25′; ½″ x 6″ or 8″ x 50′)

(38″x 4″ or 6″ x 25′; ½″ x 4″, 6″, 8″, or 10″ x 25′; ½″ x 6″ or 8″ x 50′)

 

Urethane Wear Sheets

Wear protection for bins, chutes, hoppers, and other transfer points is now easier with DUREFORM urethane wear sheets.  AR steel plates are heavy & difficult to position for welding.  For a quality alternative with excellent abrasion resistance, consider Dureform™ polyurethane ½″ x 4′ x 10′ wear sheets.  The noise dampening effect is a great secondary benefit too.  Available in 5 sheet batches.

Urethane Sheets

Dureform™ polyurethane ½″ x 4′ x 10′ wear sheet available in 5-sheet batches. Part # USHT1/2X4X10

Metal-backed Rubber Impact Pads

For heavy impact zones such as chutes, hoppers, bins, and transfer points, try DUREFORM metal backed rubber impact pads.  Available in 1½″ and 2″ overall thicknesses, these heavy duty impact pads are designed for rough service.  Standard 12″ x 12′ squares consist of SBR rubber on ¼″ metal backing plates.  The two-hole mount option has 6″ center to center hole spacing and 2″ overall thickness, part # RWT1212202, and the four-hole mount option has 8″ center to center hole spacing and 1½″ overall thickness, part # RWT1212154.  Both options mount with 58″ hex bolts (not included).

Impact Pad 4 Hole

DUREFORM™ metal backed, rubber, heavy duty, impact pad with four holes spaced at 8″. Standard 12″ x 12″ square size pad with 1½″ overall thickness on a ¼″ metal backing plate, Part # RWT1212154

Impact Pad 2 Hole

DUREFORM™ metal backed, rubber, heavy duty, impact pad with 2 holes spaced at 6″. Standard 12″ x 12″ square size pad with 2″ overall thickness on a ¼″ metal backing plate, Part # RWT1212202

Spray Bar Shield for 1½″ Pipe

Spray Bar Shield for 1 1/2” Pipe

Portion of a drawing that illustrates Dureform™ rubber spray bar boot shield which fits 1-1/2” schedule 40 pipe configurations.

Spray Bar Shield for 1 1/2” Pipe

Dureform™ rubber spray bar boot shield installed on an incline screen

Dureform™ spray bar boot shields are made from wear resistant rubber. The corrugated design allows for movement with the screen deck. Fits 1-1/2” schedule 40 pipe configurations.

Split-Disc Training Guides

Dureform Split-Disc training guides are a great help for managing belt tracking problems. Made from a special Shore D urethane formula designed to resist wear and control friction, Dureform belt trainers offer a “low cost” solution to a “high cost” material handling problem! Available for 4” cans & 5” cans. The 4” option part # UTD2PC4 has a traditional 2-point flange mount with nut & bolt joinery. The 5” option part # UTD2PC5 is engineered with extra gripping power using a T-Style band clamp which applies continuous pressure around the entire lip circumference. Hardware is included with 4” option & band clamp with 5” option.

 

Training Disc 5-inch Banded

Training Disc 5” with T-Band

Dureform Tensile Rubber

The Dureform rubber products line expands again with another high quality, specialty item for high impact wear zones. Urethane, UHMW, and hardened steel wear surfaces perform well in sliding abrasion environments, but when it comes to wear from impact, very few products will hold up. Dureform introduces a new Tensile Rubber Wear Strip that can be cut to size and drilled for mounting. Dureform Tensile Rubber is a high grade rubber with layers upon layers of internal reinforcement bands. Dureform tensile rubber is truly a unique, ultra-heavy-duty wear solution! Sold in strip form with dimensions of 120” x 10” x 1”. Part # is RRL1201001

 

Dureform Tensile Rubber, Severe Duty Impact Wear Strip

Dureform Tensile Rubber Wear Strip

 

 

Primary Belt Wiper Blades

Primary Belt Wiper Blades

Primary Belt Wiper Blades

Dureform™ primary wiper blades are now available in 22”, 28”, 34”, 40”, and 46” lengths. 3/8” Channel Groove style replaces Martin Pit Viper or Flexco Rockline blades; 1/2” Channel Groove style replace Martin HD or Argonics Eraser blades.

Long Leg Urethane Bucker Bar Liner

Long Leg Urethane Bucker Bar Liner

‘Long Leg’ Urethane Bucker Bar Liner

As an alternative to the ‘T’ Profile Channel / Crown bar liner strips, AES now offers a narrower profile ‘long leg’ liner in roll form. Designed to maximize screen deck open area, these 3/8” bucker bar liners are cut to length from a 21 foot coil. Despite the compact profile, wear life will easily surpass that of rubber. Ask for part UCBL38COIL.

 

Related Images:

Aggregate Equipment Sales is your wear parts specialist for aggregate washing equipment. We have been serving the aggregate processing industry since 2001 with high-quality, cost-effective wear parts solutions for popular sand screws, coarse material washers, and log washers. Our “Tuff Cast” and “Dureform” wear parts are generally well stocked and ready for quick shipment to you!

Let Aggregate Equipment Sales become part of your team. We don’t just sell you wear parts; we help you figure out what replacement parts your company needs. We offer high-quality replacement wear parts for your aggregate washing needs. Let us help you limit downtime.